Skip to main content
Official Bostik TDS Data

Bostik Thinset Calculator

Calibrated to official Bostik Technical Data Sheets. Calculates Bostik BAM (Graphene Infused), Big Tile & Stone, and BVO with GoldPlus system warranty compliance.

Formula Basis: ANSI & TCNA Standards
Accuracy: TDS Manufacturer Verified
Units Supported: Imperial & Metric
Update Frequency: 2025 Industry Standards
Dedicated Precision Engine
TCNA Spec Mode
Step 1

Select Bostik Product & Area

100% GoldPlus Matched System Warranty
Bostik BAM Graphene Technology Specs ANSI A118.15HT / A118.11 / ISO 13007 C2TES1P1
10m Slake
Bostik Order Specs 50 lb Bags
Required Bostik Bags
7 Bags
6.02 bags calculated • 50 lb packaging
Clean Water to Mix ~38.5 Quarts 5.5 Qts / bag
Effective Yield ~42 sq ft/bag 1/2" notch + BB
Total Freight Weight 350 lbs 7 bags @ 50 lbs
Shear Bond Rating > 550 PSI Graphene reinforced
Bostik Graphene Advantage

Bostik BAM's graphene reinforcement creates a nano-crystalline network that eliminates shrinkage and provides industry-leading shear bond strength (> 550 PSI).

Coverage estimates are planning figures calculated under TCNA standards and ANSI specifications. Actual mortar consumption may vary based on substrate flatness, troweling technique, tile back profile, and jobsite environment.

Methodology

How This Tool Calculates Your Results

Complete mathematical transparency with formulas, standard assumptions, and variable definitions.

Bostik TDS calculation math:

Effective_Yield = TDS_Base_Yield × Trowel_Multiplier
Gross_Area = Room_Area × 1.15 (15% Waste & Back-Butter)
Bags = Ceiling(Gross_Area ÷ Effective_Yield)
Water_Quarts = Bags × TDS_Quarts_Per_Bag
Nanotechnology Simulator

Bostik Graphene Nano-Platelet Simulator

See how microscopic graphene flakes prevent shear fractures under extreme commercial rolling loads.

550+ PSI BOND STRENGTH • ZERO SHEAR FRACTURES

Two-dimensional carbon graphene nano-platelets intertwine with calcium silicate hydrate crystals. Under heavy commercial forklift or scissor lift traffic, the graphene network absorbs tensile stress without cracking.

Official TDS Specs

Official Bostik Technical Specifications Matrix

Direct data from Bostik technical data sheets (TDS).

Bostik Product ANSI Standard 1/2" Square Yield Water Ratio Slake Time GoldPlus Approved?
Bostik BAM ANSI A118.15HT / A118.11 38 – 45 sq ft 5.25 – 5.75 Qts 10 Minutes Yes (Lifetime)
Big Tile & Stone ANSI A118.4HT / A118.11 38 – 45 sq ft 5.25 – 5.75 Qts 10 Minutes Yes (25-Year)
BVO Professional ANSI A118.4 / A118.11 60 – 70 sq ft 5.0 – 5.5 Qts 10 Minutes Yes (10-Year)
Single-Flex Premium ANSI A118.4TE / A118.11 38 – 45 sq ft 5.25 – 5.75 Qts 10 Minutes Yes (25-Year)
Field Checklist

Bostik Mortar Quality Checklist

Ensure complete TDS compliance with Bostik technical standards.

Score: 0% Verified
Bostik Scenarios

Common Field Bostik Installations

Commercial Showroom

300 sq ft (Bostik BAM)

Requires 9 bags of Bostik BAM Graphene. Withstands continuous commercial automobile and forklift rolling loads.

Residential Great Room

220 sq ft (Big Tile & Stone)

Requires 7 bags of Big Tile & Stone. Medium-bed non-slump formula prevents lippage on 12×24 tiles.

Shower Pan

60 sq ft Over GoldPlus

Requires 2 bags of Bostik BAM over cured GoldPlus liquid waterproofing membrane.

Failure Prevention

5 Fatal Bostik Product Installation Mistakes

Forensic breakdown of improper Bostik mixing and application errors.

1 Skipping the 10-Minute Chemical Slake

Bostik BAM's graphene nano-platelets and redispersible polymers require 10 minutes of quiet hydration. Skipping slaking prevents the nano-matrix from dispersing, cutting bond strength by 40%.

2 Using BVO on 24×24 Porcelain Slabs

Bostik BVO is a standard thinset (max 1/4\" bed). Heavy 24×24 slabs sink into the bed overnight, creating hazardous lippage. Always specify Bostik Big Tile & Stone or BAM for large tiles.

3 Tiling Over Wet Milky-White GoldPlus

Bostik GoldPlus applies as an off-white liquid and cures to a deep translucent gold. Applying mortar before it turns completely gold seals wet liquid under the tile, destroying the waterproofing seal.

4 Adding Extra Water to Re-Temper in Bucket

Pouring water into stiffening mortar dilutes the Portland cement paste and disrupts ongoing polymer chain cross-linking. Remix dry to break false-set; never add water.

Engineering Guide

Bostik Nanotechnology & Polymer Engineering Manual

Graphene nano-reinforcement, medium-bed rheology, and GoldPlus system warranties.

1. Graphene Nanotechnology in Thinset Mortar

Bostik BAM represents a breakthrough in cementitious materials science through the incorporation of microscopic two-dimensional carbon graphene nano-platelets. Graphene has a tensile strength 200 times greater than steel. In thinset mortar, the nano-platelets interlock with forming calcium silicate hydrate (C-S-H) crystals, dramatically increasing shear bond strength to over 550 PSI and mitigating micro-fractures under heavy vehicle point loads.

2. Big Tile & Stone Medium-Bed Performance

Bostik Big Tile & Stone is classified under ANSI A118.4HT ('H' for Heavy Tile, 'T' for Thixotropic). Formulated with synthetic rheology control agents, it can be applied up to 3/4" (19 mm) thick without slumping under a 25-pound porcelain or natural stone slab, completely eliminating edge lippage.

3. Bostik Pro-Spec System Warranty Protocol

When an installation utilizes an unbroken chain of Bostik products—SL-150 / SL-175 self-leveling underlayment + GoldPlus waterproofing membrane + Bostik BAM or Big Tile & Stone mortar + TruColor or Hydroment Vivid grout—the project qualifies for Bostik's comprehensive Lifetime System Warranty covering materials and replacement labor.

Common Questions

Frequently Asked Questions

Practical answers backed by TCNA Handbook recommendations and ANSI specifications.

Bostik BAM (Bostik's Advanced Mortar) is the world's first commercial thinset infused with Graphene. Graphene nano-platelets reinforce the Portland cement crystalline matrix, delivering unmatched shear bond strength (> 550 PSI) and extreme crack bridging without adding excess weight.